![Euro training Center Euro-training Center](https://www.euro-training.net/image/logo.png)
![Fundamentals of Chemical Engineering KJ394 QR Code Fundamentals of Chemical Engineering KJ394 QR Code](https://www.euro-training.net/qr/temp/testd006d67f2888d75c0411a1855fbfe8bf.png)
Fundamentals of Chemical Engineering
Overview:
Introduction:
This program considers the areas of chemical engineering that are most commonly encountered and will provide an understanding of the fundamentals to the non-specialist, and a refresher to practicing engineers, with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing.
Program Objectives:
At the end of this program the participants will be able to:
-
Learn how to interpret flowsheets and process flow diagrams.
-
Understand the use of mass and energy balances in process design.
-
Gain a basic understanding of fluid flow, including pumping and mixing.
-
Study examples relevant to the oil and gas industry.
-
Design a heat exchanger and understand the advantages/disadvantages of different types.
-
Understand distillation and separations used in oil and gas processing.
-
Appreciate the need to control environmental pollution from industry.
-
Learn how to control processes and perform basic economic analysis of a project.
Targeted Audience:
-
Petrochemical Engineers.
-
Chemical Engineers.
-
Plant Engineers.
-
Consulting Engineers.
-
Engineering Managers.
-
Maintenance Engineers/Technicians.
-
Project Engineers.
-
Process Control Engineers.
Program Outlines:
Unit 1:
Process Engineering Fundamentals:
-
Basic Concepts to remember ans Flow diagrams.
-
Piping and Instrumentation Diagrams (P&IDs).
-
Process equipment.
-
Introduction to mass and energy balances.
-
Batch VS Continuous.
-
Risk Assessments and Hazard Studies.
-
Flammability and Electrical Area Classification.
Unit 2:
Fluid Flow:
-
Introduction to Thermodynamics.
-
Pressure and Head.
-
Bernoulli’s Theorem.
-
Flow of Liquids.
-
Compressible flow.
-
Reynolds number and pressure drop in pipes.
-
Principle of process relief devices and process design of relief systems.
-
Pumps, compressors, mixing, and mixers overview.
Unit 3:
Heat Transfer:
-
Thermal conductivity.
-
Conduction and convection.
-
Insulation.
-
Heat transfer coefficients.
-
Heat exchangers, type and sizing.
-
Chemical reactions and Reaction kinetics.
-
Introduction to catalysis and Green Chemistry.
Unit 4:
Introduction To Separation Processes:
-
Distillation basics.
-
Phase behavior and vapor/liquid equilibria.
-
Distillation Equipment and Troubleshooting.
-
Gas/Liquid separation and Solid Liquid separation.
-
Absorption and adsorption.
-
Air and water pollution control.
-
Effluent treatment.
Unit 5: Process Control & Economics Basics:
-
Measured variables and process utilities overview.
-
Simple feedback control principles.
-
SIS (Safety Instrumented Systems) and SIL (Safety Integrity Level).
-
Process utilities including air, water, cooling water, and steam.
-
Electricity and power generation in process industries.
-
Process economics and preliminary economic analysis.
-
Understanding fixed and variable costs, break-even analysis.
-
Techniques for calculating raw material usage, scale-up considerations, and estimating the cost of process equipment and plants.